This crosmember has had the center raised so to lower the car. I think the drop is 1 1/4". The metal is great. A 32 front spring fits inside but the center hole was never drilled. I would use a socket head screw and just drill a round hole. I have had it on a stock 32 crossmember and the holes smatch up. It is not twisted and will bolt into a stock or aftermarket frame. If you look at the pictu...
This crossmember cracked and was welded. I had a perfectly stock straight one to use to get this one welded up right. The holes matched up. The metal is great. Never rusted. The welds have not been ground down so you can see them as welded. The edges were beveled for welding. You can see from the burnt paint that the penatration was fine.
Bought a set of four Rare Parts replacement upper a-arm bushings for 65-69 Corvairs. Found out I have Tempest arms. Installed them before I found that they were wrong. Paid $80 Would like $40
The nicest split 32 bones you will ever see. No pitting or damage. Ready to chrome. The holes for the brake rod support can not be detected. The bungs are installed and no weld is detectable there either. The length is 43" from center of the upper perch hole to the end of the sleeve. I believe these are very old as they use the sleeve and clamp rather than a jam nut on the tie rod ends. The end...
2009-2013 Dodge Ram headlights. This is a pair lightly used in great condition. OEM style.
I have an original rear glass that was ruined by sandblasting. It might be useful for a pattern for somebody. I would trace it on poster board and mail it. I don t need the glass so it needs to go. Shipping would be the problem. $15 for the glass plus shipping.
Offered is a Model A brake pedal and an end from a 32 brake pedal. The A pedal is in real good shape and has been straightened for use in my 32. I stayed with what I build a long time ago. The 32 end is nice also. They could be welded together to make a 32 pedal, A small section needs to be added to the pedal arm and also a tab for the 32 pad. I would furnish tracings of the shapes of a 32 peda...
Chevy dually wheels 16 inch paid 50 last year do not need take best offer
OEM 1971 Camaro Z/28 oil pan and windage tray removed from a 1971 LT-1 engine.
This is going to get deleted. I am scrapping an air conditioner and the cabinet has some perfect louvered panels. Still completely painted and no damage. I thought someone could weld them in like the guy in Oz. Maybe hood, side panel, deck lid, etc. The louvers are 6" on 1/2" centers. Also a taperd arangement from small to big. I would take a panel to the Fredericksburg swap at the end of the m...
New Rock sliders for 2019 Chevrolet Colorado. Came on the new pick-up, we replaced them with steps.
Returns Accepted: Returns Accepted Refund will be given as: Money Back Item must be returned within: 14 Days Return shipping will be paid by: Buyer Restocking Fee: No Part Brand: Honda Placement on Vehicle: Front Country of Manufacture: Japan Manufacturer Part Number: 90305-463-000 1980-1981-1982 Honda GL1100A GL1100I GL 1100 Goldwing Axle Nut 12mm OEM NOS Condition : Excellent - New Old Stock ...